- keeb.io Official Distributor
- Warranty & Support Included
- Build your own Keeb.
- Lets Split.
- Levison Staggered Keyboard
- 1.6mm PCB Material
Top/bottom plates for the Levinson keyboard. The middle layers are optional and can be added in between the top and bottom plates at any time (stainless steel and acrylic plate versions only).
These plates are backwards-compatible with the Let’s Split v2, if you want to use it with those PCBs.
Plates for the Levinson are offered in these variants:
The plates come with the following:
Switch plates are compatible with MX and Alps switches and support MX switch top removal. Note that for the non-1u cutouts however, the switches won’t have anything on the plate to grab on to, so you need to be careful with alignment when soldering the switch.
The design files for the case: Levinson Case Files
This middle layer is used to enclose the keyboard. For now, a clear acrylic layer will be offered that’s compatible with the stainless steel, acrylic, and PCB plates w/exterior screws.
There are 2 different types of middle layers available:
The middle layers come with 2 10mm thick pieces and 2 2mm thick pieces. If you remove the plastic from the Pro Micro headers, you can just use the 10mm pieces alone on each side. If you leave them on, you’ll need to use a 10mm piece in conjunction with a 2mm for a total of 12mm of thickness.
Note: This is not compatible with the PCB plates with the interior screws.